Navy & Ground Support Equipment

Full Steam Ahead

As the technical needs for today’s fleets have evolved, we have collaborated with industry leaders to develop a more affordable line of LPACs, MPACs, and HPACs, in addition to our trademark MIL- Spec and custom-built systems found on over one-third of the U.S. naval fleet of undersea and surface warfare combatants.

In addition to the Navy, organizations such as the U.S. Coast Guard and Military Sealift Command have expressed a need for high demand technology in marine service air, gas compressors, and nitrogen generation systems. We’ve responded by updating and standardizing many of our products lines to reduce manufacturing costs, operating PSI, and noise.

We are committed to helping you lower lifecycle costs and maintenance costs, as well as improving the capabilities of your fleet through technological improvements and new offerings such as:

  • New LOX standard Gerald R. Ford (CVN 78) Class for land and sea
  • New data analysis capabilities to reduce operational and manning costs
  • New design of V-22 and MNGG legacy products
  • New line of lower cost LPACs, MPACs, and HPACs
  • Greater manufacturing and maintenance support for international fleets

Grid List

Set Descending Direction

1-10 of 11

Page:
  1. 1
  2. 2
  1. 5R5-75 Series
    The 5R5-75 design allows for easy retrofit through hatches as small as 27" in diameter without complete disassembly of the package, and the small footprint, and upright design allows the unit to be fitted into a very small installation area. Fully Qualified For Military Marine Use 5R5-75A: NSN 4310-01-353-6128 5R5-75B-BP: NSN 4310-01-524-7824 Learn More
  2. NGEN Series
    This high purity stationary inert gas nitrogen generator (NGEN) is designed for industrial inert gas users. The RIX model NGEN-30S provides high quality nitrogen product gas for use in applications where high pressure inert gas generation is needed to supply gas assist injection molding; industrial gas cylinder filling; leak testing; fuel tank blanketing; strut and tire servicing, and other high purity inert gas applications. Learn More
  3. MINIGEN
    Nitrogen where you need it, when you need it. Oil-free and ready to use. The RIX MINIGEN is a self-contained nitrogen generation system that will produce (95-99.5%) dry inert gas from atmospheric feed air. The nitrogen is available at high pressure (up to 3,000 psig) for storage or for use in aircraft support, refineries, or other inerting situations. Fully Qualified For Military Marine Use MG-30BD: NSN 4310-01-481-1693 Learn More
  4. V-22 MPAC
    The V-22 Mobile Air Commpressor (V-22 MPAC) is a skid mounted, totally enclosed air compressor used as an oil-free air-testing source. Learn More
  5. MNGG Series
    The Membrane Nitrogen Gas Generator (MNGG) is used to generate and dispense gaseous nitrogen for the servicing of aircraft systems and support equipment. Learn More
  6. 2JS and 2JJS Series
    Our 2JS4B-150 is a four-stage air compressor package with accessories and electric motor drive controlled by a GE Programmable Controller. Learn More
  7. MARC-350 Series
    The modular design of the MARC-350 Air Rotary Compressor allows shipboard installation of “retrofit” packages on all but a few ships without cutting or removing bulkheads, major disassembly of the compressor, or “hotwork” on the compressor frame. Fully Qualified For Military Marine Use MARC-350A: NSN 4310-01-572-3756 Learn More
  8. STAR-200 Series
    RIX Industries’ proven state-of-the-art, oil-free design offers unprecedented value, reliability and performance, from 30-450 SCFM and delivering up to 150 PSIG discharge pressure. The compressed air is totally oil-free because oil is not used anywhere in the compressor design; rather, water is used to cool, seal, and lubricate during compression. Fully Qualified For Military Use STAR-200D: NSN 4310-01-547-9404 Learn More
  9.  NON-MAG Series
    The RIX NON-MAG is a non-magnetic version of our 2KX2-30B starting air compressor. The NON-MAG is an oil lubricated air compressor designed for continuous duty, producing 600 PSIG, 20 SCFM, at a crankshaft speed of 600 rpm. Fully Qualified For Military Use 2KX2-30A and B: NSN 4310-01-450-7263 Learn More
  10. MPAC Series
    The MPAC air compressor is used to generate and dispense dry air for shipboard systems. This MPAC delivers the minimum rated air at a capacity of 80 SCFM at 600 PSIG. Learn More

Grid List

Set Descending Direction

1-10 of 11

Page:
  1. 1
  2. 2