RIX Industries Flow Downs

12/18/2020

Description:

SHOCK TEST PROCEDURE

Clause:

This requirement may be satisfied by one of the following methods.1. PROCEDURE SUBMITTAL:Submit all new, high impact shock tests, high impact shock test procedure and/or any listedprocedure if revised subsequent to the last approval for each test to be performed inaccordance with Appendix L prior to performing any tests. The shock test procedure shallinclude all required information specified in MIL-S-901D and DI-ENVR-80709.Heavyweight Shock Test Procedures shall be submitted to the purchaser for approval no laterthan six (6) months prior to the test date. Lightweight and Medium Weight Shock TestProcedures shall be submitted to the purchaser for approval no later than six (6) months prior tothe test date. Include clearly marked on the submittal:a. This current purchase order/item number(s),b. NN Material Number(s),c. This coded note number,d. The procedure number/revision.2. NOTIFICATION OF (UNLISTED) APPROVED/PENDING APPROVAL PROCEDURE(S):If previous approval has been obtained from NNS OR the procedure has been submitted and ispending approval from NNS but the procedure number and revision is not listed on this purchaseorder/item, re-submittal of the procedure is not required. Submit notification of the previous ORpending approval, including 1.a. through d. above and the PO and item number of the previoussubmittal. For previously approved procedures, also include the previous approval letternumber/identification.3. USE OF (LISTED) APPROVED PROCEDURE(S):If the procedure and revision used is listed on this purchase order/item, this requirement issatisfied, the supplier is authorized to perform work and no submittal is required.The above requirements do not relieve the seller of his responsibility to comply with thespecification requirements of the purchase order.Documents/extensions shall be submitted as follows:SPARS (Shipbuilding Partners and Suppliers) enabled suppliers are required to submit throughhttps://spars.huntingtoningalls.com/ngcspars/AuthAll other suppliers shall submit via:mail to:Newport News Shipbuilding4101 Washington Ave.Newport News, VA 23607Attn: E68 Software CoordinatorBldg. 902-2Revision History TableRev Description Revision DateC011 Removed template reference no longer available on website. 6/12/16C012 In section 1. (Changed from two (2) to six (6) months prior to thetest date.Changed Mailing address to reference 'O52 SoftwareCoordinator'2/8/19C013 Revised: Mailing address- changed E45 to E68. 12-18-2020This revision history is provided for convenience and does not alleviate the supplier’s responsibility withunderstanding and complying with the full coded note.