RIX Industries Flow Downs
Prime Coded Note:
Q040
Revision:
7/11/2017
Description:
Raw Materials Test Results
Clause:
Seller shall include with each shipment the raw material test report which states that the lot of material furnished has been tested, inspected and found to be in compliance with the applicable material specification(s) and revision(s). The report may come from the following sources:Material Manufacturer Test Report (Mill Test Report)Material Distributor Test ReportTest report from independent laboratory chosen by the manufacturer of product when material is not furnished by L3Harris EDD.Seller is responsible to ensure that material used to manufacture product supplied to L3Harris EDD is traceable to the Raw Material supplier (i.e. Raw Material Lot number from Mill).If Seller supplies raw material that is converted from its original state (via forging, swaging, heat treating, etc.), Seller is responsible to ensure performance of all physical tests where the manufacturing process has altered the material from its original properties. Data submitted must reflect the condition of the material as offered for delivery and is in addition to the Material Manufacturer Test Report. NOTE – this paragraph is applicable to raw material, but is not applicable to machined piece parts. For raw material suppliers, a mill test report that complies with requirements of Q304 and the requirements of Q307 (certificate of conformance) may be used as a single report to satisfy both Q304 and Q307 clauses.Q304 only applies for Supplier furnished materialQ306 - 02/20/17- Shelf Life and Storage Controls - Seller shall label the limited shelf-life materials/parts specified in this purchase order/contract with the following minimum information:Manufacturer’s NameGovernment, Industry, or Buyer specification to which item is purchased including type and class.Date of Manufacture or cure dateBatch numberStorage temperatureThe materials/parts shipped under this purchase order/contract will arrive at the Buyer’s facility with at least 75% of the specified shelf-life remaining.